- Fan too strong?
- Which Regulator?
- Green goo coming out of my torch
- Yet another eye glass question
- How long is it safe to use the same set of hoses?
- natural gas connection
- Are there guidelines for distance from torch to back wall?
- Vent necessary if torching outside?
- plumbing propane to 2nd floor
- Natural gas - pipe or hose?
- I think I messed up with this Burn Blister.
- OPTX 20/20 HydroTac stick-on lens?
- Question about type of fan i've been using
- Ventilation expansion options?
- ventalation .. giving me a headache
- Ventilation: a treatise
- New studio, trying to figure out ventilation/makeup air
- Ventilation question
- Polycarbonate Eye Protection Is it Good?
- Have any of you encountered this scam?
- Skin cancer risks
- need flashback arrestor help
- Inline fan booster good?
- Eyes in perfect shape!
- Propane outside during a Chicago winter?
- Ventilation
- Removing Low pressure gauge
- Status pressure calculation help needed
- How to Avoid Burning the House Down?
- "Inlet Airstream Temperature" rating on fans
- Multiple Torch Propane Pressure HELP please!
- Got a problem with a sour smell
- Heating the Detached Garage Studio
- Make-up Air
- Ventilation consulting services?
- Ventilation for open air studio space?
- ventilation covers? Louvers?
- Silver glass issue?
- Is extended non-use a problem?
- Yet Another Ventilation Question
- Propane Question
- Respirator ?
- Safety questions and studio setup
- Fan question
- Garage ventilation and gas water heater
- Yet ANOTHER beginner tries to figure out the mysteries of ventilation...
- Help with "Flume" Type Ventilation
- Natural Gas for Multiple Torches
- exhaust fan question
- Temperature of air in the ducts?
- Another ventilation question...
- Map Gas Recall 1-20-2012
- AIM kiln plugged into multi-plug?
- electrical plug question
- Sunsodium safe
- Measuring Face Opening -Ventialtion
- Nasal Screens
- Is there a simple answer to setting up the right ventilation?
- Safe distance from torch to wall?
- Pressure for multiple torches from liquid oxyoxy
- Hood Range vs Close Venting
- Flashback arrestor
- Oxy refurbishing?
- I'm looking ofr ventialtion
- What is best material to make a vent hood?
- Laser Goggles
- Flashback arrestors
- Ventilation cost
- Studio Setup
- Fan question - too much? How wide a hood?
- Would These Hood Fans Work?
- Exhaust Fan
- My new tank of propane is making weird rattling noises
- gasline
- setting up on the balcony
- Many different questions about setting up a studio.
- Benchtop Powder Box for Enamels
- Need source for serious eye protection information, please?
- portable ventilation
- Dumb kiln question
- Do I actually need a hood?
- Upgrading my ventilation
- Any feedback on Sunsodium lenses
- Natural Gas
- does the kiln need ventilation?
- How much natural gas pressure do I need?
- Hose Between Map-Pro Tank and Hothead Torch
- Technical hood venting question?
- Metal cutting safety glasses?
- Safety Glasses
- Fans
- Broken fuel valve knob
- Ventilation Questions
- Funnel ventilation setup?
- MAPP gas with HH
- What to put under a kiln for safety?
- Attaching oxygen to torch
- Yet ANOTHER ventilation Question
- Tank placement- if I build a deck
- Etching **WARNING**
- do didiums wear out?
- Soreness of the Lungs
- Is my propane regulator safe to use any more?
- vintage eye wear (cobalt blue lenses) ???
- sealing ventilation system
- CFM/Static Pressure in inches wg???
- Legal Advice Needed: Teacher/Volunteer Liability
- Barley Box Fan
- funnel size and shape
- There's an odor while torching...
- Harbor freight ventilator
- My AIR Space
- Need help with ventilation
- RZ Mask
- Natural Gas line
- can I y in two vents to one roof vent
- Mini CC hook up question
- questions about using a hood fan for ventilation
- Two torch stations in studio
- Air Flow 1150 CFM Fan Review?
- Flashback arrestors
- Venting out of a chimney?
- eye protection for melting recycled bottle glass
- Finally setting up oxy/propane
- Ventilation tubing through my window?
- Brr!!
- Complete Ventilation Systems
- My ventilation system
- How to shut off a duct when not in use?
- Tank or regulator problems
- *Urgent Make Up Air Help
- Metallic taste in mouth?
- help...contractor needs to know duct size...new house..new studio
- should I trust my torches gas valve?
- testing for fume inhalation
- Gurgling torch/Bouncing Flame
- Does my ventilation look OK?
- Pixie Dust
- How to connect natural gas line to torch
- Quick release valves
- Need temporary ventilation solution for an apartment
- Ventilation system - someone from EU?
- Easy vent hood
- Make Up Air?
- Buying a ventilation system - Australia
- Hood Height
- HELP! Extraction solutions for a studio in an old office space
- Help. New propane regulator, no instructions.
- Moving to a small studio, is my proposed vent system going to be ok?
- Help, need quick reply b/f it is sold... is this fan for studio ventilation okay?
- Studio safety
- Pros and Cons of 4 types of ventilation setups? (see pics)
- Regulator/hose hookup with B fitting hose
- hot head shooting liquid and sparks???
- F120 kiln on wood desk?
- Propane smell from HH on 1 lb bottle?
- HH eye safety
- propane hose-running it outside
- So You Wear a Face Mask at all times when torching ?
- clogged torch
- Rose didys and welder shade glass?
- HELP! I'm Waterlogged! Or something.
- HELP - propane set up
- Help with ventilation openings in cold climate
- Fan warning not to use for fumes????
- kiln and digi wiring double check please
- Kiln surface temperature question
- Well, I finally did it.....
- Advice Please
- Cleaning brass fittings for oxygen use
- Is Firecheck on a natural-gas torch NECESSARY?
- Ventilation in a garage
- Lordy B'gordy, Ventilation Is My Achilles Heel
- Window/ventilation question
- What glasses to get for lampworking?
- Duct size?
- music when lampworking
- ventilation and air exchange
- Advice and suggestions wanted for working in a basement with low ceilings
- National 8m torch heat question
- propane outside
- vent your kiln too!
- HELP please ASAP!
- Propane Hose cut
- Help with ventilation please
- Has anyone had any experience with this respirator
- Hood creating mini tornados! Help!
- Oxygen Safety – What You Need to Know
- How much pressure to my bobcat
- Eye problems from flameworking -ptygerium
- Weird noises from gauge cluster on Oxygen tank
- Ventilation problem
- Negative pressure in new studio need help
- Low Ceilings?
- Exhaust Fans
- Newbie looking for glasses
- I need some ventilation help!
- Portable Ventilation Setup...
- Ventilation Problem
- low pressure O2
- Skin problem due to heat
- Exhaust Problem.....
- Simple Green Safety
- Air in, air out
- Chemtane
- Where to have incoming air
- Smoke and carbon monoxide detector
- Where to exit the ventilation tube?
- Will this work?
- Ventilation - pretty please, help!
- Noise reduction strategies- Duct muffler inside with the blower?
- Moving States, Need Propane Help asap
- Question about hoses.
- Yet another ventilation concern! Help please!
- Yet another ventilation concern! Help please!
- Help with ventilation
- Need help with ventilation for new studio!!!
- propane - hard pipe: what size?
- Do You Use Oxygen-Safe Teflon Tape?
- Propane: do you bleed long pipe?
- Garage studio ventilation & setup
- For venting: 640 CFM range hood or 630 inline blower?
- New studio help please!
- Help operate Kiln please
- eye problem
- ventilation help please
- Testing my Natural Gas line
- Paragon Kiln I use for Glass, can I put metal in?
- Using a partially-filled propane tank?
- Prescription Safety Glasses
- ventilation through a window with a screen
- Washtub for catching the fumes
- Ventilation advice
- Test
- Glass dust
- Fan question
- Kiln elements- 'quartz tubing'
- Informative website link
- question about setup
- Tank Storage
- eye protection
- New exhaust and more ventilation Basics
- Garage ventilation using funnels
- Beadmaking hazards
- Glasses or Goggles
- Ventilation question for 4 station bench
- Fan size based on hood size only? Makeup air under bench? Ventilation Help Needed
- Propane & Oxygen tanks
- ventilation and temperature questions
- Basement Ventilation Setup questions