Google
 

PDA

View Full Interactive Version Of This Page : Help - Mid Range Plus


Sylvie Anne
2005-07-03, 4:09pm
Hi guys..

I am hoping someone who has this torch will speak up..

I bought one a few months ago and it has been hiding on the floor in a corner because I've been afraid to hook it up.

Just when I thought I would see if I could return it, I found a big honkin bead that I wanted to try to make more of.. and it's hard to do in that narrow little pirahna flame.. so I need some input..

I am in a very small second floor bedroom. The ceiling is about 7.5 feet high and my torch is a few feet from the wall (2-3). Is anybody else using a similar setup with a honkin torch? And have you ever ignited a wall or a ceiling or the neighbor's cat?

Cosmo
2005-07-05, 5:47am
I have that exact same torch, and it's set up on a metal table about 3' wide. The other side of the table is against a wall. I have a piece of fireproof sheetrock on the wall just in case, but it doesn't show any kind of burn marks or anything. After working for several hours on the torch, the wall is just slightly warm.

I don't run it wide open that often. But when I do, I often pull the table out a little, but I don't think I really need to. If you are using soft glass, you probably won't need to run it that hard. You probably just need a wider flame, not a hotter one.

IF-Designs
2005-07-07, 11:25am
Im looking for a used maybe midrange plus lol ;) if fyou end up not liking it let me know :) I was trying to wait till the gathering bazaar....

Cosmo
2005-07-07, 11:43am
I may be getting rid of mine to go to a Red Max soon. I'll post it here in the Garage Sale if I do...