oxy con

[dragonfly designs 56]

How much does it cost to get a hose to fit two oxycons? Any idea who sells them. Mine I bought at the welding store...

[Ekkie]

I used a Y connection to join the 2 hoses from the oxycons to the hosr that connected to the torch.

[squid]

Someone posted on here recently that you can buy the brass Y at Home Depot - then all you need is the clear hose.

[Alaska]

Purchase a length of 1/4 inch ID plastic tube or green welding hose. Then you can either use the higher cost brass or lower cost plastic 'T' with 1/4 inch barb fittings.

In this example, there are also check valves placed in the line from each machine to prevent any significant backflow.



194238

[Lisa]

Purchase a length of 1/4 inch ID plastic tube or green welding hose. Then you can either use the higher cost brass or lower cost plastic 'T' with 1/4 inch barb fittings.

In this example, there are also check valves placed in the line from each machine to prevent any significant backflow.



194238

Thanks! I actually posted the same question in the garage just now!

[dragonfly designs 56]

thanks everyone :)

[CO_Phantom]

If you are intimidated about making your own (not that you should be), I got mine from Kimberly (kbinkster here on LE) when I bought my 2 oxycons. I don't imagine she charges much for them.

Just another resource for you.

-Amy