Google
 

PDA

View Full Interactive Version Of This Page : Help!!!! with setting up mini cc


torchie
2006-04-17, 1:00pm
Could someone who has a mini cc with two concentrators post a photo of the hook up for me?
I have got everything for the setup now but the hoses and it would help if I could bring a photo in to show the guys at the welding supply shop.
The last time I went in they looked at me like I was a crazy lady.
(Or tell me a place online I buy get them all in one place that would actually answer my emails)

This is just too frustrating!!!!
I ordered the torch, concentrators and guage from three different places and not one came with instructions.
My hot head is starting to look better and better.
Ruth

Steph'sBeadCorner
2006-04-17, 1:17pm
You'll need Grade T hose for the propane...and when I bought mine from the welding supply store it came with an oxygen hose.

THEN you need a Y connector to connect your oxy cons to the oxygen hose. Is that what you're inquiring about? The welding supply store probably won't carry one.. but they might carry the supplies to make one if you want to go that way - or the local hardware store.

Here's a link to that subject -


http://www.lampworketc.com/forums/showthread.php?t=19336&highlight=y+connector

The oxycon is connected to the Y connector.. the Y connector is connected to the oxygen line (green) and the oxygen line is connected to the oxygen port on your torch. sing this to your welding supply guy.. he'll get it.

Good luck!