Inside out Bead

[Lizabeads]

Can someone give a tutorial on how to do an inside out bead? Thanks [-o<

[Venessa]

I have seen a couple of methods mentioned-one of them is using tubing, then dropping frit on the inside. The other involves making a hollow, and decorating the inside, then collapsing it. Other than that, I cannot be of any further assistance. :-D

[Emmett's Glass]

They just had 1 in the flow or glassline, I can;t remember which.
I make iso beads and do it by taking some tubing and flareing it open laying some stringers & cane on the inside then fuming it and closing it up. I then blow it out and condence it a few times so the wall thickness is even. I blow a hole on the far end and remove the blow tube and open that end and I'm done. (None of that bead release to clean out.)
E