flameworking outside

[Dale Smeltzer]

Just curious does anybody flamework outside. I have a small storage building but I dont think there is enough room in there and I have an open space under the metal awning between the storage space and my mobile home and was just curious if it might be a possibility to do some flameworking there????


Dale:wave:

[PaulaD]

I don't but I know of people who do.
It should be ok as long as there is no wind to puch your flame around.
Paula

[ArtcoInc]

Just curious does anybody flamework outside. I have a small storage building but I dont think there is enough room in there and I have an open space under the metal awning between the storage space and my mobile home and was just curious if it might be a possibility to do some flameworking there????

Sure, it's possible, if you have the room, and the electrical power. Some things to consider:

1) If there is any wind, even the slightest breeze, it can blow your flame around, and it can also chill your beads.

2) Consistent lighting is very important. You need to be able to see what you are doing. Sometimes, it is too bright outside, other times it's not bright enough.

Otherwise, go for it :)

Malcolm

[anneli]

Well, the only place I've ever worked so far is outside...so I guess I'm an expert! My area is attached to a shed...so I do have 1 wall, a roof and 4 posts that hold the thing up. The main problem of course are the elements. I am in California so I don't have too many down days in the winter (not too cold out usually), but in the summer I do have alot of HOT days. On the hot days I start really early in the morning and go until I can't take it no more. In the winter, if it's cold out, I'll wait until around noon or so and work in the afternoons.

The wind is a problem too...but I've put up another wall on one side and some shades (mostly to block the sun) so that helps. The OTHER problem I have (but I've controlled it alot since I first started) is spiders, bugs, etc. I am a spider freak, so when I see one I freak out. Last year a looked up and found a Black Widow looking back at me...so that ended my work for the day. I usually spray down the hole area right before spring comes on..and I'm ok for 4 or 5 months (haven't seen any Black Widows). The key is too keep it clean.

All in all, I really like working outside...I'm an "outside" person anyways. Although, now that I am thinking of increasing my work output, I have decided I may move inside to our spare room (I am always wanting to work in the evenings but have no lights outside). I would like to work inside on days that are too hot or cold inside...but geez...I don't want to give up my outside studio either...like I said, I like being outside :)

I would definitely give it a try outside...it's really not so bad...not bad at all really....and one important thing, you don't have to worry so much about the fumes. Let us know how it works out :) Anne

[Dale Smeltzer]

Just curious I am in Selma California

[Dale M.]

I think this "forum" may have better answers for you....

http://www.lampworketc.com/forums/forumdisplay.php?f=37

I work on a 4 foot table in "screen room" on side of mobile home...

Size of studio is relative to space available... If you think about it, you only need a space about 4 feet x 4 feet to have space for you and a simple bench to support torch and tools and some glass , maybe same space as a office desk... If work space is bigger that you can reach at arms length its getting to big and if you have to move away from torch to "get something" you are taking bead out of its hot zone.... Sure big rooms are desirable and a luxury but think about what you are actually doing and amount of space you actually occupy during bead making process... Only critical thing is you have good ventilation...

By the way I think you could build awesome studio in 6 foot by 6 foot metal shed....

I've had a work shop in a 6x8 shed for years. It contains a work bench (2x6 foot) along one wall it also has a 12 drawer cabinet under workbench and space for small air compressor, a 15 drawer rolling tool box in center of back wall and set of storage shelves and a metal lathe along other wall.... Actually standing space in middle is about 3x4 feet so "everything is within arms reach...

Dale

[lunamoonshadow]

I used to torch in the driveway wearing safety-rated sunglasses (full sun was too bright for didys--and I couldn't see the flame--I found I needed to see the flame to keep track of where it was!) & using a little rolling computer cart for my hothead torch. I dragged everything else inside & out every time I wanted to torch. Did that for a couple years--so yes, it's *totally* possible.
(and I'm in Maine!!!)

[Torcha]

i have been torching outside for a few months now. We had a "screen room" off our back deck. My DH put some corrugated fiberglass sliders around the sides to keep out the wind and cut out the glare (not clear but opaque fiberglass).

I have lots of room and most of the year it is great. Can get a little cool during part of the winter, but I am sure I will find a way to make it work.

I know what you mean about spiders, but for the most part it has not been too bad.
Alana

[jaci]

i torch outside at the flea market! it's fun! except for the wind!!!!! just have a way of picking up glass pieces! it's not fun to find them in your lawn lol.
________
BUY GLASS PIPES (http://glasspipes.net/)