Google
 

PDA

View Full Interactive Version Of This Page : Prolly should have put this here, not in safety...


teachertracey
2008-07-23, 7:11pm
I need help. What are the regulator(suggested) settings for ....

Torch is hooked up(Nortel Minor) and we have a 100lb. propane and a large oxygen tank...I torched tonight and did okay, but what do you suggest having the regulators set at for each? I want to make sure I won't blow the neighborhood up or waste a lot of glass.

http://www.lampworketc.com/forums/sh...lator+settings

Is that for oxygen(tanked) or a concentrator?

I think we had the propane too high today and the oxygen not enough, which is why I think I'll have muddy beads tomorrow morning. :x

Gila
2008-07-24, 6:34am
From the Nortel spec sheet:

NORTEL burners run on LOW pressures
Propane: 2-6 PSI
Oxygen: 5-8 PSI

teachertracey
2008-07-24, 11:39am
Thank you! We'll try that tonight.

Gila
2008-07-24, 8:49pm
You're welcome!