Lampwork Etc.

Lampwork Etc. (http://www.lampworketc.com/forums/index.php)
-   Tutorials (http://www.lampworketc.com/forums/forumdisplay.php?f=17)
-   -   Headpin Tutorial? (http://www.lampworketc.com/forums/showthread.php?t=211482)

Dianne Gleaton 2011-11-28 11:55am

Headpin Tutorial?
 
Has anyone done or seen a tutorial for making glass bead headpins?
I am unsure if the bead is made on the wire, or glued on afterwards.
Type of wire to use etc. TIA, Dianne

Eileen 2011-11-28 12:01pm

http://www.lampworketc.com/forums/sh...=glass+headpin
http://lampworketc.com/forums/showth...lass+head+pins
Those are a few threads that came up when I did a search, there were lots more hits but I didn't check them to see what came up.
Show us if you make some!

glassymom 2011-11-28 12:28pm

Hi Dianne
When I make them I use copper mainly, I heat it in the flame till the end gets a little tiny bit of a ball, then I wind on my glass, add frit or what ever, shape it up and pop it in the kiln. If I'm making it for silver wire then I have some steel wire that Idipped in bead release making it fit the size of my silver wire.......make my glass part the same way and pop in kiln. Next day I clean it out and glue it on to the silver with epoxy.
I am sure you can make it right on the silver but I was afraid I would melt it cause I tend to get closer to the flame as I work and have to keep reminding myself to move back....figured my wire woudl turn into a big ball before that LOL
sue

Fran Carrico 2012-01-13 8:21pm

Love Sharon's method!

http://www.lampworketc.com/forums/sh...15#post3858115

windsong1 2017-02-01 10:29pm

Using Sharon's method of using epoxy, would a silver coated wire, like Artistic wire work? If so, what gauge would you suggest?


All times are GMT -7. The time now is 12:37am.

Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.