torch issues
I just moved my studio to a new location and in the move also replaced my propane tank. Now when I fire up my torch, I can't get a steady flame - it surges constantly with the flame rising and falling every 5 or 6 seconds - anyone know what could cause that? A video is posted on my facebook page here: https://www.facebook.com/Beads-n-Such-141819152530121/publishing_tools/?section=VIDEOS&sort[0]=created_time_descending
|
Try turning up the pressures on your regulator. It might be that or your hoses. I would try regulators first.
|
The last time that happened to me, it was my oxygen concentrator. If you have one, when was the last time you serviced it?
|
thanks for the recommendations!
|
Torch tip size
I need to calculate the consumption of gas-oxygen for the purchase of some equipment and I need to know the size of the jet's outputs of the gtt and betlehem torch. Can somebody help me?? Some have told me that they are # 3 and # 5 depending on which stages. Is it like that? ... Thanks ... Juan
|
I need to calculate the consumption of gas-oxygen for the purchase of some equipment and I need to know the size of the jet's outputs of the gtt and betlehem torch. Can somebody help me?? Some have told me that they are # 3 and # 5 depending on which stages. Is it like that? ... Thanks ... Juan
|
I just searched for the same "breathing" issue and found this thread. I am going to try 2 things. Disconnect then reconnect my newly filled propane tank, and turn up the pressure on the propane. Fingers crossed!
http://lampworketc.com/forums/showth...ight=Breathing |
All times are GMT -7. The time now is 7:21pm. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.