Ventilation size
Hello,
In the last weeks I read a lot about ventilation but I am still not sure if my research came to the right conclusion and I don't want to play with my health. I am using an Arnold 40mm PSL Zenit for which I would install a hood with opening dimension of 30inchx30inch and a fan with the power of 1000cfm. (3 feet ducting, 0 bends) Is the hood big enough and will the fan do the job? Best duppy |
I have this. I run a Mirage and a Phantom. 1,600cfm
A 15 inch hole in some plywood in a window. It really makes my whole 7 x 8 foot room into a wind tunnel. $65 http://www.homedepot.com/p/Ventamati...Q&gclsrc=aw.ds |
All times are GMT -7. The time now is 4:12pm. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.