Regulators
I have a question re: regulators... What do I do with them?? :) Ok, my question is a bit more involved...
I am in the process of setting up my studio now that we are living in Panama. I have a Nortel Minor torch and am now using tanked oxygen (I couldn't travel with my VERY HEAVY oxygen concentrator!). I have never fully understood where I needed to set the propane regulator to and I DEFINITELY have no idea what to set the oxygen regulator to... Any insight would be most appreciated (thought I would try here before asking it to google...). Gracias! Annie |
if you have the original paperwork from your torch it should have the recommended PSI settings for fuel usually around 5 psi and oxygen any where from 5-10psi for that size torch
|
General rule is to set fuel pressure regulator to about 1/3 to 1/2 the pressure you set oxygen regulator... For example if you use oxygen at about 15psi you propane (fuel ) should be about 5 to 7psi...
Dale |
Great - thanks so much Morgan and Dale! I do not have the original paperwork for the torch as I got it 2nd hand, but that is easy enough to find!
Gracias! Annie |
All times are GMT -7. The time now is 5:15pm. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.