Upgrade to Bravo & Oxycon
Hi,
I'm planning to upgrade slowly from a Mega Minor to a Bravo. I want to blow small tubes and make small marbles. I already use a Oxycon15 and wonder if 2 oxycon15 really works or if there is a better efficient option (no oxy bottle where I am) ? How big a marble can I do with a Bravo and 2 oxycon ? |
You can probably get close to 2 inches but it gets to be slow going with the oxycons.
I fed My Phantom 18 LPM and made a 2.4 inch clear in one hour. The bravo is about the same size as the Phantom. |
I have a bravo and two 20 psi oxycons. I know feel I could get more out of the Bravo IF I got a third on there.
But atm I can make sculptural work up to 9 inches, and have made 1.5 inch marbles with it... |
I also have the Bravo and 2 x 20's plus 1 Hurricane 20 psi - I run the hurricane on the inner and the 2 20's on the outer
in 5 years, I have been able to do everything I have wanted to with the Bravo. Quote:
|
Thanks for the information. I have a hard time limiting myself to my small torch and bead size.
|
Quote:
|
Quote:
|
My Bravo takes a lot less fuel than my Champ-- and even less than my PMd2. Could air inject a Beth by feeding air into oxy hose with fitting. Bravo is designed to run well on oxycon--. I use bottled air only because I used to weld and live just a mile from welding supply shop. I think you could do a lot of glass work with a Bravo and oxycon(s).
|
Where is the best place to buy oxycon 20 + ? It's almost impossible to get a 15's in Canada.
|
All times are GMT -7. The time now is 10:15pm. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.