Leaking Oxygen Valve Carlisle CC
I have recently replaced both oxy valves on my 6 year old refurbed Carlisle CC. However the outerfire oxy has started leaking again after only a few weeks. has anyone ever had this trouble or heard of faulty valves coming from the factory ?
|
I am not familiar with enough torches to comment on 'faulty valves' from the factory but I have learned from others that the mating parts in torches, regulators and tank valves (oxygen and fuel) are made from extremely soft metal and that over tightening, even by hand, kills them in just one or two closings.
Also, any dust getting into the lines or carbon residue from back flash flames 'popping' backward through the torch has enough grit to scratch the mating faces and allow leaks to develop. |
Try some white teflon tape to seal it and see if that helps.
|
Thanks for your help with this. I managed to get sorted with extremely helpful advice from Bob at Carlisle. Think the damage was caused by detritus in my lines from when I cganged over to hard plumbing. I purged the lines and got the valve sorted.So far so good!
|
All times are GMT -7. The time now is 10:16pm. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.