Torch and Oxy
1. So what Torch do you have?
2. What are you using with it? 3. What is the altitude where you live? |
I have a Minor and 10lpm oxycon. I am at 4500 altitude. I need more firepower....
|
I have a Mega Minor, a 5lpm oxycon, and I need more oxygen!
Altitude is about 1150. Barbara |
I'm on a Bravo with 2 Integra/Regalia
|
Does altitude affect torches? My brain says logically it affects oxygen/pressure or something?
Anywho, GTT Lynx on an M20, and a GTT Bobcat on an M10, altitude 900 ft from what I could find through google lol :) I went from a Minor to my Lynx...considering a switch (thread in torch room). |
I run a lynx and a mirage on tanked oxygen. Love them.
|
Minor, propane, 5lpm oxy con and HH w propylene, propane, mapp... Whatever is on hand ;). I'm in Lebanon ct 06249 if you want to find out my altitude. I think I'm pretty close to sea level. Maybe 700-1000 feet up off the ocean generally, tops. There are some big hills lol.
|
Tomorrow, I'll be able to say that I've got a MiniCC and an 8LPM oxycon - set up, that is :-D Just waiting on FBA and fuel regulator, due tomorrow so I can spark this baby up.
And I'm about as sea level as you can get, so altitude is hardly a description of my position :lol: |
Jenne--I happened to see your post about your torches--I'm still jealous you have a Lynx and a Bobcat!
And Di--I just am flat out green--you are in Australia! Honeymooned in NZ and wanted to get across, but....! Enjoy your new toy!!! The reason I started this post is to see how many folks are out there in my parameters so I can figure out if it's just me, the altitude, me, the torch, or really just me! I watch videos and their glass melts so fast amd smooth! Plus I want to play with boro....my boro melt times are hideous, and I can't make diddly! Chatted with Pipyr about her low temp boro tut--may just have to make that a birthday treat to myself next week....! |
:lol: I'm green that you were in NZ - I come from there, but rarely get back to see rellies :-(
Would be interesting to see a bit of a cross section of lampworkers and elevations, and what's effective and not, too. Great topic! |
well let's just set a date and meet in Auckland! Beautiful city! Only did the North Island--Coromandel coast (swoon!) We got married in Vanuatu--what an adventure! One hell of a stinkin long flight though!
I belong to the Reno Gem & Mineral Society and our sister club is in Wanganui! Hope to meet a lampworker from there one of these days! |
Holy smokes! Di--you made the Three Faces of Steve!! Hysterical!! I just made the connection!
|
Check out facebook - I think there is at least one in the 'Nui
|
The DH is telling me I have to come to bed now (it's after midnight here) How do I find them on FB? Talk to ya later!
|
:lol: Yep, Seemed just the right name for them :lol:
|
I'm using a Bravo and Tanks at about 500 ft. My guess is that the altitude may have and affect if you are on oxy con.
|
mega minor on ex15 and propane, 685ft asl.
will be getting a second oxycon and a midrange w/premix topfire soon though, more options with that torch. |
Phantom and Mirage on tanks at 1000 ft. Altitude won't affect performance on tanks but is a problem with oxycons if they aren't set up for higher altitudes. Performance for different brands varies, some top out at 7000ft and others got up to a little over 13,000. If you are over 7000 ft you might want to check with the manufacturer to be sure you've got optimum performance.
Robert |
boro will be TEDIOUS on a minor:) try tanked for a little more umph. in the smaller torches the betta burns hot and it is great for a newbie because it is crazy hard to burn glass on!
:)crystal |
Nortel Minor and a 10lpm oxy con I am at 4200, roughly. So far, so good.
|
Altitude - 435 ft above sea level
Oxygen - bank of four 'K' tanks on valved manifold and two 5 lpm oxycons w/holding tank Torches - homemade Japanese style verticle, Mini CC, National 8M, GTT Mirage, GTT Kabuki, Herbert-Arnold 55mm, Baracuda, and Tiger Shark. Oh and a Smith mini torch. Over in the shop; three or four welding style torches. |
Phantom, inner fire (lynx) on 2 M-15 oxycons, outer fire on tanked, close the sea level.
|
Quote:
|
I'll bet the Kabuki and the HA can drain those 4 tanks in about 8 hours.
|
Quote:
Sea Level, Knight Bullet, Tanked is the only way for me. |
Sea level Gtt Kobuki, mirage, 2 phantoms, lynx, Carlisle cc , nortel ssq, two nortel minors, two smith little, a herbie hand torch,and 6 national 3a .... Think that's it( not all the torches are mine just most of them and we only run 3 at a time but that will be changing soon)
We have a LOX tank and a bank of 10 cylinders. The cylinders I fill with two home fills powered by two 5lpm concentrators. If I could suggest to anybody that feels lacking on oxy pressure to get a homefill and use your concentrator to charge cylinders. |
When I found I was serious about doing glass and before the economy tanked I was able to indulge a very serious addiction to tool collection. Problem is that all my life I have regretted any decision to get rid of any tool, gun, or book so I don't any more.
I loves my toys....Yeah! |
Cricket, bbq tank propane, 8lpm oxycon, 27m above sea level
|
tHANKS TO ALL WHO HAVE REPLIED. i ADJUSTED MY PROPANE PRESSURE AND THAT SEEMS TO HAVE HELPED A BIT, BUT i THINK i JUST WANT MORE POWER!
|
Crap-just saw I had the caps lock on--sorry!
|
All times are GMT -7. The time now is 12:26am. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.