Handy rod rest
In case it helps anyone, I used expanded metal to make a pair of rod rests. Bought a 5"x7" piece on Ebay for US$8, sliced it in half with a grinder then bent it in a vise (persuaded it with a hammer). Lastly, used a file to smooth out rough tips. Not much work.
It's stainless so will not conduct heat away from glass as well as soft steel. |
Good idea!
|
That's great! Thanks for sharing!
|
Very Smart.
|
All times are GMT -7. The time now is 11:04pm. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.