Brass Frit Tutorial
I have been playing with what I call "Brass Frit" for a couple of years now. Here is a tutorial on how I use it. You can purchase it from Mike at www.MikesBrassForGlass.com This baggie of brass frit will last you a long time :) Remember a little goes a long way.
Brass Frit Tutorial Supplies needed • Brass Frit from MikesBrassForGlass.com. • Marver with brass spread out on it. I use my razor tool to move the brass around. • Opaque glass. • Clear glass. • Razor tool. Caution: Be careful when using brass frit. It is sharp and can cause injury. Use Brass Frit only under a ventilation system. Note: I used very little brass frit in these beads. Place the brass frit on your marver before starting your bead. Spread it very thin on the marver with your razor tool. 1. Make a tube bead of opaque glass and marver it into the length you want to your final bead to be. 2. Heat the surface of the glass until glowing and roll it in the brass frit. Then, marver the frit into the base glass. 3. Next, keep the bead below the flame and encase it in clear covering all the brass frit. I like a heavy encasement of clear because it adds a lot of depth to the bead. Do not place frit directly into the flame. It will spark and burn off the bead. 4. Heat the encased bead until glowing. You will see the gold bubbles form. Don’t heat your bead too long because it will bring bubbles to the surface of your bead. Once you start to see the bubbles form, pull the bead out of the flame. If you need more bubbles, reheat. 5. Finish decorating your bead and place it into the kiln. Have fun and I would love to see what you create! Dawn |
Hi Dawn,
Love the bead. I'll have to get some of the Brass frit from Mike. Great Idea. Thank you for sharing the tut. Janet |
Thanks Dawn! I'm going to give it a try. I didn't even know this stuff existed.
|
Quote:
Thanks Janet! |
Well that's a good enough excuse to get the presses I've been wanting.
Order placed now I've just got to wait. International post is a pain. Thanks for the info Dawn. Regards Helen |
That is awesome!!
|
Helen it is a good excuse.... :) What new press did you order?
Dawn |
Hi Dawn
I got the rounded links and the squisher. You can never have too many tool's :badgrin:. Helen |
Quote:
I've been stalking my mail box for a few days because of the Frantz glass sale. I love having something to look forward too. A girl can never have too many tools :) Have an awesome day! Dawn |
Great tutorial Dawn !
So nice of you to share! I'm wondering if the "frit" could be made as needed by snipping some brass mesh into tiny pieces? |
My husband is a wood turner and uses the brass shaving to fill small holes to highlight some of his pieces. He gets his shavings at a hardware store that makes keys. They always are happy to let him take all he wants just to get it cleaned out.
Glenda |
Cadia I don't see why not :)
Glenda that is a great idea! Just make sure it is pure brass. I know my key place cuts all different colors on there machine. Dawn |
I remember you showing us how to use the brass frit at a meeting a few years ago and you gave us all some to try out. Mine is on a shelf someplace, guess I better get it out and dust it off so I can give it a try.
|
Tracy where does all the time go. It just seems like yesterday..... I've had a few treasures I dusted off of my shelf too :)
Hugs, Dawn |
I LOVE the look of the brass frit, how cool is that???
|
Thanks for the cool tut Dawn. I just ordered some brass frit and can't wait to play with it!
|
Thanks so much for the tut, Dawn, I just had to order the frit (and of course, another press) based on what you've shared here.
I can't wait for them to arrive so I can try this, your photos and beads are fantastic - very inspirational! Thanks for sharing! Mary |
Thank you so much for the tutorial. The beads look fantastic!
I will give this a try. Thank you for sharing! Andrea |
Thanks everyone! These are really quite easy to make :)
I just like to watch the bubbles form. I all ways think of Fninding Nemo...My bubbles, My bubbles...... I love that cartoon! Dawn |
Dawn
Do you find that using brass cracks in beads? All beads that I used brass in cracked. Not sure what I did wrong but I'm bummed. It's a lovely effect though :-) Must keep trying |
Quote:
It would make sense if you have too much brass and a lot of bubbles that it would weaken the bead. Kind of like when you use too much baking soda to make bubbles in beads. Too much is the kiss of death, lol. I would also put them into the kiln a little on the hot side. I hope that helps :) Dawn |
That could be. I haven't tried Mike's yet and I wish he had them on there when I bought the links press lol. Someone sold me some brass mesh and so I played with that. I didn't get alot of the mesh to dissolve into freeform bubbles though and if brass is used on a transparent red base..it turns silver. Thought that was odd but kind of neat but was looking at Christmas beads with red and gold and I got silver!
|
Dawn,
You mentioned a razor tool as needed for this, but I don't see where you used it. Thank~you! |
Quote:
|
Well, I have my beads with brass frit (bouth from Mike's) also cracking.
I did encase in Precision Diamond Clear, if that makes any difference ... :( :( :( |
Quote:
I have not used diamond clear when making these so I don't know if that is a factor or not. Let me know what happens. Dawn |
Quote:
Dawn |
4 Attachment(s)
I just thought I show you how much Brass Frit I use. I take my small tweezers and pick up a small pinch (sorry for the bad picture my camera wanted to focus on everything else but the pinch of brass). Then I spread that pinch out on my marver with my razor tool. It is a very thin coat of brass. I only roll my heated tube bead ONCE through the brass. It will NOT pick up all the brass. I would say it only picks up 50% of it. So you see I am only using a very small amount.
When I want to make a line of bubbles on a bead I use my razor tool and make a row of brass frit to roll my heated tube bead in 1 time. Once again you could use this line of brass frit a few more times before it is used up. I know a picture is worth a thousand words in my book so I hope this helps out. |
Hi Dawn boy those are nice, are you still teaching classes?
doreen |
Hi Doreen! Yes I still teach, but I teach out of my home studio now :)
Dawn |
All times are GMT -7. The time now is 3:48am. |
Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.