Quote:
Originally Posted by Oh Honey
I like the bleed off idea. I wonder if there is a way to shutdown the compressor and then bleed off the oxycons till the compressor kicks in? Would be the best of both worlds but can't figure anyway it would be possible.
|
sure, just put a check valve on the single end of a "T" with one end of the T to the oxycon output and the other end to the compressor input. If the check valve is set at 1-2 psi below the oxycons output pressure, when the compresor turns off, the oxygen pressure will crack the valve seal until the compressor turns back on.