I am setting up my stations and would like to hear your opinions thoughts.I hope this sketch up picture works. well if it does this would be the main cabinet. ventilation is my main question. The hole is 10" but can be bigger. My normal height of flame is just below the middle. Would this be a good way or do I go with a hood and make all them corners with the duct. I am thinking of doing it this way for ease, less bends and less length of duct used. This way I have 5ft then one turn up and 4ft. straight out. the big cylinder is a rubber maid garbage can I'm making into a muffler and the 720 CFM inline fan will also sit in there. Fan first then muffler. Filled with that white stuff you fill cushions with. Did some research and it's said to be safe.
Cabinet is 48" wide 16 " deep then the added table makes it 32" deep
There is a foot deep gass trap also.
|