View Single Post
  #12  
Old 2016-04-04, 10:55am
SGA's Avatar
SGA SGA is offline
Fried Cat
 
Join Date: Jan 02, 2011
Posts: 665
Default

Quote:
Originally Posted by TortoiseAvenger View Post
I didn't read your edit right away, and at first, I wanted to respond "says who?" But given your edit, I completely agree. In my experience with soft glass it's too sensitive to thermal shock to "get away" with this.

I'm considering other kilns, and I doubt I'll be buying for awhile. There are many kilns out there with that basic design only larger, and I might do something like that.

SGA: Good call on noting the space surrounding an object inside the kiln. This makes the kiln I linked to quite small.
Well, admittedly I edited after your response because I was thinking strictly about 104. I ignored the boro part. And you're absolutely correct, most boro workers I've seen on a small scale batch anneal. I've only ever seen huge pieces go into a kiln right off.

I'm more concerned with the number of segments the controller software would let you use given how this is marketed towards metal clay.
Reply With Quote