Quote:
Originally Posted by Lynne Smith
Well I have tried by putting a dot of colour on the side of the bead and then adding the mesh, surrounding that with clear and slowly melting in the edge as in an implosion but Carmen is correct, I am sure, the implosion, if if happened, would be going the wrong way.
So I then tried to do it off the bead think that i would add it after I had imploded the glass through the mesh but it still did'nt happen so back to the drawing board.
I have another idea which if it works I will post about it here.
Lynne S
|
Lynn, after the failure on the bead I tried the same off mandrel trick - it worked a little but my mesh was so small. I made a maria of clear, attached the mesh and swipe coated the mesh with ivory. Melted in like an implosion - don't know how I'd get the darn blob on a bead if i did succeed.