I have a Scorpion that I had serviced about a month ago.....works like a charm. Except today I slipped and hit the end of the torch with a rod and seemed to have clogged a port. I read all the past info and did the getting it warm, turning off the propane and putting it in cold water with the oxy on 3 or 4 times but no help. I have stuck my port cleaner down the offending port and it seemed tight at first but worked itself looser. All the ports "seem to be open" but I'm still getting a longer candle out of the lower left port (see pic) .... what can I do to fix this? Any help would be greatly appreciated ... I've never had this problem before so I'm stumped!
