Thread: CIM Shocky?
View Single Post
  #2  
Old 2014-08-01, 5:00am
Kalorlo's Avatar
Kalorlo Kalorlo is offline
Senior Member
 
Join Date: Jan 31, 2010
Location: London, UK
Posts: 358
Default

Not in general, no, but specific rods of whatever colour and manufacturer can always be different! Try looking at the end and see if it has airholes running through it? Though I don't usually get that with CiM's rods at all.

Some colours or rods need putting back in the flame a bit more slowly, or they can shock off just above the part you'd previously heated. I get that with all manufacturers though.
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote