Oil will tame the beast with Mica powder... there is squeegee oil you can buy, but clove oil will work too. Mix it with the mica powder to make a paint. Just make sure the oil is mostly dried out... well with fusing it will probably dry out in the kiln...when working on the torch it can catch fire sometimes if it isn't dry enough, but doesn't hurt anything. There are also water based mediums too that you can use but I found they often bubble which is a PIA.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Believe in Yourself and Anything is Possible! To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. SRA Artist A64
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|