View Single Post
  #8  
Old 2018-09-02, 6:18pm
Speedslug's Avatar
Speedslug Speedslug is offline
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
Default

I will suggest that you get safety glasses as well for your cutting, hacking and such.

Just one metal fleck in you eyes will convince you of the cost benefit.

I used double ended turn buckles to make leveling the hood easier when hanging from chains.

You may find the noise is reduced if you place a knee or a foot on the surf you are cutting in the tank.

Do the windows open? If so you could just fit a board in the opening.

If you route some duct work out the top of the window and mount it up off the ground then you can route another section of duct work to the bottom of the same window and use that as an entrance for make up air.

You just need to make sure the exhaust and the intake ends are ten feet apart.

That is how I set up mine.

I picked up my vent fan from an old house furnace we replaced.

You should be able to pick one up from most HVAC installers for free.
They have to pay to have them hauled away when they install new units so they will often give them away and they move a metric ton of air in a hurry.
__________________
The Zombie Apocalypse is Upon Us.
Reply With Quote