Quote:
Originally Posted by Beadazoid
OK! Mission accomplished!! Parts tested, leak found, part replaced! It was the non-torch half of the quick-connect. I happened to have an extra one here! Now all that's left is to re-verify once I start up my torch (later today).
|
Nope. That apparently was not the only one. After I replaced the quick connect part I retested all the connects and regulator again and found another leak on half of the flashback arrestor. I'm going to see if that will tighten enough if I use 2 wrenches. I hope so or I'll have to buy another.
So test and retest.