Thread: How to connect natural gas line to torch
View Single Post
  #5  
Old 2013-02-24, 12:31pm
houptdavid's Avatar
houptdavid houptdavid is offline
honorary bead lady
  
Join Date: Jan 14, 2008
Location: Mostly the doghouse
Posts: 5,180
Default
Wait, eleven different plumbers cannot figure out how to change from a 1/8" npt-1/4" barb fitting to a 1/8" npt- 1/4" flare fitting?

Seriously? Just unscrew it. The problem is they don't know because it isn't an appliance.
Can they run a gas line with a shut off valve and just CAP IT?

After looking thru the International Residential Code you can use copper (K or L) tubing and flare fittings to connect gas "appliances", this isn't rocket science!

Check out the other gas thread, and show them the picture with the valve and fire suppressor and see if they can do that
__________________
David
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Last edited by houptdavid; 2013-02-24 at 12:42pm.
Reply With Quote