View Single Post
  #4  
Old 2018-07-04, 12:09pm
Shaper Shaper is offline
Member
 
Join Date: Oct 24, 2013
Posts: 80
Default

I would suggest you go to the TMP site; http://www.talkglass.com/forum/forum.php
and read, read, read, and when you get some experience ask questions.
Starting out on clear is a good suggestion. Get some rod and a few pieces of small bore tube to start with and not worry about color until you can blow balls, and push maria's with the tube and lay lines, make dots, pull stringers and make bails with the rod.
Clear works much easier than a lot of the color does.

Have fun with it.
Reply With Quote