View Single Post
  #8  
Old 2010-12-10, 8:06am
Shrimp's Avatar
Shrimp Shrimp is offline
And silence is golden
 
Join Date: Oct 05, 2005
Location: The Shrimp Shack
Posts: 3,230
Default

That is correct Jack. I do have to pull out on the knob. There is a white mark on the side of the knob, as you can see in the above photo. Most likely to match up where the original setting should be. When you say "adjust it half a turn", do you mean to have the mark on the turning portion of the knob turned enough so that it is directly across from the white line on the non-turning part of the knob?

Here is a picture of the lpm meter. I have a question regarding where the ball should be located in order to have an accurate lpm measurement. Should it be setting directly on the 5 line where half of the ball is above the line, and the other half is below the line? Or should the bottom of the ball be resting on top of the 5 line, and the top of the ball is just under the next line above the 5? It's somewhat of an odd question, but I have never known the answer to this.

__________________
~The Mango Queen~
Reply With Quote