I tried the off mandrel trick too.
I thought maybe pulling the mesh down a little and then turning it upside down and letting it ooze then pulling the mesh down a little, etc. It seemed like everytime it started to work then the sides would ooze around and cover the implosion.
It seems like you need to be able to grab on to the mesh and pull it up while you have the darn thing upside down for the gravity ooze but I can get a good hold of the mesh once it is on the bead.
I am wondering if leaving a good overlap folded out of mesh once wrapped around the bead would give you something like a little handle to pull on to force the ooze.....hmmmm...I think I am going to mess around with that today.
Lonni (who is just thinking out loud.)
__________________
Lonni
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
If it was easy then everybody would do it!
|