View Single Post
  #16  
Old 2012-12-27, 12:13pm
drew1492 drew1492 is offline
Member
 
Join Date: Oct 19, 2011
Posts: 53
Default

It can fill a K tank to 2000 psi in under 10 hours. Uses about 500w of power. You will need about 10lpm at about 10psi to feed it. I ran it off a 5lpm and 10lpm concentrator with the pressure bumped up a bit.

They are pricey you are looking at about $3k but if you cant keep liquid or have oxy delivered it is a nice option. I have used it for around 8 months I had to re seal the gauge once... I had it hooked up to 4 K tanks all the time and we would just fill to 1000-1500psi. In oxy costs if I was using K tanks at $24 I have probably just about broken even on it. It is nice to just leave everything set up and only turn it on when you are low. I would buy it again in a heartbeat I took a risk though not really knowing what I was getting at first.

It runs off standard voltage as well no 220 needed.
Reply With Quote