View Single Post
  #1  
Old 2005-06-15, 4:52pm
Mr. Smiley's Avatar
Mr. Smiley Mr. Smiley is offline
boro color bender
 
Join Date: Jun 06, 2005
Location: The Oregon coast!
Posts: 10,039
Default Mr. Smiley's heart tutorial...

Step one, get yourself a ball of glass one the end of a punty. The design is up to you.

Next, squish it flat like a lollipop... different thickness will yield different hearts.

This is the super secret step I've never revealed before... take a pair of $1 scissors from the office supply store (plastic handles, stainless blades). Heat up the gather again and cut it from top to bottom of the pancake.

Now you put it back in the fire and shape... This is easier shown than explained, so hopefully I can get some pics...

When you have the lobes the shape you want, hang the whole thing upside down and turn in the flame. Direct most of the heat towards the bottom and let droop. The top lobes will fall together and the bottom will stretch out.

Once you have the general shape you want, you just have to put on a loop. Normally one lobe is higher and that's the one I put the loop on.

For the loop, I put about a half inch of rod on the spot I want the hoop to be on. Then I heat the glass and flip with pliers into a loop. Again, this would be easier to show than to tell.

Melt in the backside of the loop and reheat to shape as desired.

Now, punty up with a cold weld to the loop.

Pull off and shape the bottom of the heart, hold loop with pliers or tweezers and snap off cold welded punty. Fire polish the punty mark and behold the beauty you just made...
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

"Truth is, everybody is going to hurt you; you just gotta find the ones worth suffering for." -Bob Marley

Last edited by Mr. Smiley; 2005-07-24 at 6:17am.
Reply With Quote