Newbie here, too! All of the strands I have read make me feel quite inadequate! My beads are lopsided and I only have a table in the garage for a "studio." BUT I LOVE DOING THIS!
This is what I decided on for my initial set up:
(729) 729 - Tools - Rod Cutter with Two Round Cutting Wheels
(167
1678 - Flameworking - Shaping Tools - Set of 12
(2677) 2677 Glass Shears - 7 inch - 3 inch blade - Gold Handles
(EX10) EX10 - Oxygen Concentrators - EX-10
(1654-45) Moretti Starter Pack - 45 pc
(T02625) Moretti/Effetre Transparent - Light Teal - .25 LBS
(T03625) Moretti/Effetre Transparent - Dark Aquamarine - .25 LBS
(T012) Effetre / Moretti Light Amber- Lt Topaz .25lb
(T06425) T06425 - Moretti/Effetre Transparent - Black - .25 LBS
(P264) P264 --Effetre / Moretti Pastels-- P264 Ivory 1 Pound
(T07225) Moretti/Effetre Transparent - Orange (Striking) - .25 LBS
(T012) Effetre / Moretti Light Amber- Lt Topaz .25lb
(T07625) T076 - Moretti/Effetre Transparent - Red (Striking) - .25 LBS
(T0041401) Effetre / Moretti Clear 13-14 mm 1lb
(5628STUPS) Blue Bird kiln (UPS)
(71267) Book - Creating Glass Beads 71267
(4MinorOxy) Kit #4 with the Minor Burner Torch without Oxy Reg
REB11 1 X REB11 - Gas Equipment - Regulator - Fuel
T124S 1 X T124 - Gas Equipment - Twin Hose Set - 1/4'' Diameter
(T254) (Hose length: 25 foot)
1501 1 X Gas Spark Lighter - 1501
1600Bundle139 1 X Minor Burner Torch
Any comments would be most welcomed. I have called the propane company to put in a 100# tank.
Cindy