I found you really need to double dip the 5/32 mandrel as well. When my bead release was thin some of my beads wouldn't fit. This is on the Biagi bracelet.
FYI the 1/4 mandrel double dipped or thick worked with the rivets that are 5mm in the hole. Haven't gotten to silver coring yet-which is what you are lookin' at.
I found all this out by asking a million questions in other threads.I am math challenged but these above figures work for me.
good luck!
__________________
-Merilee
Lynx, tanked propane, M-10 oxy and refurb oxy -5.
|