The wire can burn up if you leave it in the flame. I get the glass very hot but not runny and then heat the wire just a little. Not the red glowing look........more like the dark grey look. Work close to the flame with the glass and the wire and it will all come together when the glass is very soft and the wire a dark grey. Sometimes I let a very little ball gather on the wire and then when I add it to the glass there is a little more body to be inside of the leaf. After the leaves come out of the kiln they are a very dark greay and I take a rough cloth and pull up the wire and this seems to clean it and work harden it a little.
Bobby
|