Quote:
Originally Posted by squid
This tubing:
Sterling Silver Tubing fits Pandora Chain.
Size 5.08mm OD/ 4.37mm ID 27 ga.
Manufacture pre-cut in 1 foot lengths
is a PERFECT fit for 3/16" mandrels and is made by:
Indian Jewelers Supply, Inc.
Part number STTB27x5mm
1-800-545-6540
This thread shows this tubing cored and on a pandora chain so you can see how it fits over the end:
http://www.lampworketc.com/forums/sh...&postcount=132 |
So I purchased 5 pieces of this SS tubing from Indian Jewelers Supply and it fits inside my beads made on 3/16 mandrels but the tubing does not fit over the end of my Pandora chain!
When I measure the ID of the tubing with my digital calipers, it's only reading 4.27mm ID.
Has anyone had a problem with this tubing being inconsistent? Gotta go see if I can return it now...