Thread: Polishing glass
View Single Post
  #8  
Old 2018-12-07, 8:32pm
Speedslug's Avatar
Speedslug Speedslug is offline
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
Default

You can spend time with a wet finger or a damp cloth smoothing the surface of the bead release before melting the glass onto it.

You can probably also get polishing compounds and bits to buff the inside of the bead holes as well.

But the question I would ask is "To what end do you want this done?'

If you want to hide the rough surface inside simple things like thinned clear acrylic nail polish can be painted on the inside with little effort and the outer ends can be cleaned up with polish remover.

Anything more permanent than that would have me looking at coring the bead with silver tubing.
__________________
The Zombie Apocalypse is Upon Us.

Last edited by Speedslug; 2018-12-07 at 8:36pm.
Reply With Quote