Quote:
Originally Posted by EJohnsonArtGlass
Thank you, Arnold. You were correct - I had a bad relay. Got the kiln back today. Total cost of the repair $70 including parts and labor.
And kudos to Mark Newman of Mark's Kiln Repair. He's in the Denver area and I highly recommend his work if you live anywhere around here. He is fast, knowledgeable and reasonably priced.
|
I am pleased that the repair was fairly minor. When something goes wrong with a kiln, I look at the least expensive repairs first. Often a kiln can be repaired by replacing a loose wire or a disconnected element connector.
Good luck with your firings!
Sincerely,
Arnold Howard
Paragon Industries, L.P., Mesquite, Texas USA
ahoward@paragonweb.com /
www.paragonweb.com