View Single Post
  #25  
Old 2010-03-20, 6:25pm
annieb43 annieb43 is offline
Glass and Tool Hog
 
Join Date: Mar 17, 2010
Location: Georgia
Posts: 41
Default

I used this exact list and found each part at Home Depot today.
My hint is to say NO when the plumbing guys ask.
They just want to say it cant be done right off the bat.
Make them leave you alone to think.

Before you go, measure, draw and visualize what you need.
I took the parts out of the wrapper and put it together right there.
They were totally understanding when I brought my odd contraption
up to the register with all the baggies in a bucket LOL

The only thing I asked for help with was the gas grade teflon tape
and clamps. Both of which were not with the plumbing parts.
Take the pics and the parts numbers and search the
little examples until you get an EXACT parts match.

On my way there, and after asking the "what about that barbed end to the propane tank?"
question here, It occurred to me (duh!) that I would just be cutting off
enough of my hose (with the fitting on it) to make it to the tank.
The remaining hose would go from my inside shut off valve with it's barbed
connection to the barbed connection on my minor.

Whew! That was real brain work for me
Thank you ever so much for making this so clear.
__________________
Annie Thomas-Burke
Nortel Minor, Tank O2 and Propane, using COE 104

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

Last edited by annieb43; 2010-03-20 at 6:33pm.
Reply With Quote