Earring Display Cards from Business Cards
Time Saver: I use business cards for displaying earrings and had been poking the holes in each card individually with a needle. This was time consuming and the holes ended up in slightly different positions for each card.
I'm sure this is not novel, but I just hit on the idea of using my Dremel with a tiny drill tip to drill through a large stack of cards all at once. I used binder clips to hold all the cards together, marked the holes and bingo, bango all cards done at once. Happy Dance and wanted to share in case there are others out there who could use this tip.
__________________
Elizabeth
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|