View Single Post
  #7  
Old 2016-06-13, 6:19am
Katia Katia is offline
Senior Member
 
Join Date: Mar 14, 2015
Location: Moscow, Russia
Posts: 131
Default

Eileen, Phill, I switched the oxycon in advance, it was working for 10 minutes or so with the line opened at the torch.

But it seems it is too sensitive, it does not wait even for 10 seconds and reduces production to 0.1 almost immediately when the line closes.

Thank you for your help, may be I just need to spend more time next weekend to go deeper into its possible settings.

Last edited by Katia; 2016-06-13 at 6:34am.
Reply With Quote