ditto on the freezer packs.
Graphite absorbs water, so I do not think so, it does not stay as hot as long either.
Graphite does not really do a good job of pulling heat out of a bead to begin eith, I dont think cooling it much would really help it. Maybe try a piece of marble or tile that has been in the freezer. (if it does not condensate) Marble is great and readily available for cheep in small pieces. Even a marble tile from lowes or home depot is only a few bucks each. They are good and cool. Placing your graphite on that will help it cool faster, and the marble itself can be used as a marver. Just keep in mind it may have a coating that may burn off and possibly stain lighter colors. I usually use the back side if it is an issue. It is usually just fine though.
__________________
Minor 10lpm Oxy-Con + HH on Propylene . . . . . .
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. . To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. hand dyed silk ribbons in many colors!
WASHERS & TOPPERS - layering components for interchangeable glass topper and to use in other jewelry/metalwork.:
|