Quote:
Originally Posted by MonsterheadGlassArts
I am setting up my stations and would like to hear your opinions thoughts.I hope this sketch up picture works. well if it does this would be the main cabinet. ventilation is my main question. The hole is 10" but can be bigger. My normal height of flame is just below the middle. Would this be a good way or do I go with a hood and make all them corners with the duct. I am thinking of doing it this way for ease, less bends and less length of duct used. This way I have 5ft then one turn up and 4ft. straight out. the big cylinder is a rubber maid garbage can I'm making into a muffler and the 720 CFM inline fan will also sit in there. Fan first then muffler. Filled with that white stuff you fill cushions with. Did some research and it's said to be safe.
Cabinet is 48" wide 16 " deep then the added table makes it 32" deep
There is a foot deep gass trap also.
|
Only problem with concept is "muffler" stuffed with "white stuff you fill cushions with" will reduce air flow and ventilation will be less effective.... Also muffler material will trap heavy metals and dust and grits over time it will become a real toxic disposal problem... Suggest you drop muffler idea....
Also how high is front opening.... IF it is more than 18 inches (we already know width is 48 inches) fan will probably be to small....
Dale
__________________
You can lead a person to knowledge, but you can't make them think.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal