Very nice. You will want a 20 psi concentrator for full blaze, according to the instructions. (15-25 psi)
https://docs.wixstatic.com/ugd/0f433...e0d745bb89.pdf
I think this GTT FAQ flow and pressure table was written earlier, it shows 10-15 psi:
https://docs.wixstatic.com/ugd/0f433...6eb9542e62.pdf
Edit: I have the Lynx center in my Mirage but I'm not set up so I don't really know. Mirage instructions say, "Torches can operate on a minimum setting of 5 lbs. of gas pressure and 10 lbs. of oxygen pressure, but you will not have maximum results at these settings." If Wally didn't mention a specific pressure for oxygen on the Lynx, I'd guess 10 psi is good enough. You don't want the candles too close to the face or damage can result.