STEP # 11.
Next you will need 73 inches of 26 gauge wire for smaller pendant or 84 inches for larger pendant. You will want to cut the wire in shorter lengths about 15 to 20 inches long. It will be easier to work with. Start at the top of the pendant frame and make 3 wraps. You may need to use your finger nail to push wraps close together.
STEP # 12.
This part may be a little ackward so you may want to hold the outside frame and inside loop in place with your chain nose pliers.
Now you will be attaching the loop and bail. Both loops should be the same size so it does'nt matter which loop you use. Center one of the loops in between the pendant frame. You will then wrap all the way around the center loop and outsideframe. Make 2 wraps around outside frame and repeat with another wrap around outside frame and inside loop. Do this until you have 5 wraps around the inside loop and outside frame.