View Single Post
  #7  
Old 2008-10-29, 8:21am
jewlie beads's Avatar
jewlie beads jewlie beads is offline
Senior Member
 
Join Date: Jan 11, 2007
Location: Eastern NC.
Posts: 4,268
Default

STEP # 11.


Next you will need 73 inches of 26 gauge wire for smaller pendant or 84 inches for larger pendant. You will want to cut the wire in shorter lengths about 15 to 20 inches long. It will be easier to work with. Start at the top of the pendant frame and make 3 wraps. You may need to use your finger nail to push wraps close together.



STEP # 12.


This part may be a little ackward so you may want to hold the outside frame and inside loop in place with your chain nose pliers.
Now you will be attaching the loop and bail. Both loops should be the same size so it does'nt matter which loop you use. Center one of the loops in between the pendant frame. You will then wrap all the way around the center loop and outsideframe. Make 2 wraps around outside frame and repeat with another wrap around outside frame and inside loop. Do this until you have 5 wraps around the inside loop and outside frame.


__________________
Jewlie or Julie, its all the same.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
My Facebook
Reply With Quote