I second using good mandrels...Bent ones make life so much harder!!! Cheap mandrels can be made using a small bolt cutter to cut the steel, a jig that helps you to cut consistent lengths for speed and a dremel with a disc cutter bit or sandpaper to grind/round the ends. You can get the stainless steel from a welding shop or look online. 316 is best but you can use 308. Hope this helps,
Cheers
Jenny
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|