Here is a diagram of placement for lines and dots for pendant with
2 layers of petals and leaves.
Black ink represents glass, red ink represents tooling.
I try for a tiny dot in center of maria then surround it with 5 dots.
then 5 more tiny dots spaced between first 5. That creats a kind of a
star shape, with the dots. Can you see it?
Using your dots as refference, lay 5 fine lines evenly around center dots.
They can just be straight lines.
Heat to just barely melt in, then GENTLY poke center dots with small
pic. not a lot just a touch. Too much and it will go like for a jelly fish.
Then I use an exacto knife, I have 4 of them with different size blades in them, use a small one here, and just barely score the middle of each of
the 5 lines. Then go back and drag your small pic in the line you made
with the exacto, drag it outward away from center, heat the area, small
focused flame, drag, go around till it looks like this:
Then lay second thin line
score drag etc repeat
third line, that will be your leaves.
score drag center then add light scores as shown,
that gets that edgy leaf look.
I use biggest exacto blade on leaves,
all my exacto blades are just square, not pointed.
Basically what I hope everyone notices is that the top
drawing is what you lay on in thin lines of glass.
This last drawing is what you should look like before
you compress. The Pendant that is.
sometime I partially compress the petals then add leaves,
play with it and post what you get.