maybe I did not explain it well enough the kiln is plugged into a separate stand alone controller that uses its own thermocouple to monitor the kiln the only thing the infinite switch did was to allow a flow of current to the element as decided by the controller. Any way I talked to the electrical engineer at work and he looked over the schematics and said the infinite control was underrated for its use any way and to get a 15amp rated toggle switch and replace it as it is only there to interrupt the flow from the controller if absolutely needed.
Thank you for your input.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. People who call me weird think I should take it personally. if you really want to upset me you should call me normal !!!
on To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|