Thread: Runaway Kiln??
View Single Post
  #3  
Old 2008-06-16, 6:48pm
skookum's Avatar
skookum skookum is offline
Against the Grain
 
Join Date: Sep 22, 2006
Location: Alberta, Canada
Posts: 265
Default

Hi Eric,

I showed your post to DH (electrician and instrument mechanic) and he said to replace the final power relay as it sounds as if the contacts are welded shut. The final power relay is inside the kiln controller.

Is this a fix that you would be able to do (soldering electronics)? If so, this is a fix that you can do.

Hope this helps,
__________________
Sherri
"The essential qualities of life: critters, good food, good drink, hot torch, a room full of glass, and an understanding DH."

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
under construction

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

HELLCAT! with 2 oxycons and household NG (yes I will be increasing the oxy)

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

D-41
Reply With Quote