Quote:
Originally Posted by jwhicks
I have a question about my kiln. It is a small Jen Ken bead box I bought used. The inside is about 6 X 6 X 4. It has an infinity switch for temperature control. My problem is that once it gets heated up, I can't get it to cool down at a proper rate. Even on the lowest setting the temperature stays around 900 degrees. So I order to cool down slowly I have been turning it off and on manually every few minutes in an effort to keep things from cooling down too fast.
|
Can you hear the infinite control switch cycle on and off when the switch is in the low position?
Sincerely,
Arnold Howard
Paragon Industries, L.P., Mesquite, Texas USA
ahoward@paragonweb.com /
www.paragonweb.com